Glossary

GVM

What is gross vehicle mass (GVM)?

Gross vehicle mass is the maximum a vehicle is allowed to weigh fully loaded, set by the manufacturer, and it is the number that decides whether a vehicle is legally light or heavy in Australia.

Dean Calapai, Founder and CEO · Updated 18 November 2026

Read the definition

Updated 18 November 2026

What counts towards gross vehicle mass?

Everything on the vehicle counts: the vehicle itself, fuel, the driver and passengers, tools, cargo, and accessories such as a bull bar, canopy, tray or roof racks. If a trailer is attached, the weight it puts on the tow ball counts too.

Three other terms sit beside GVM:

  • Tare mass is the weight of the empty vehicle.
  • Payload is what you can add. It is GVM less tare mass, and it includes the people on board.
  • Gross combination mass is the limit for the vehicle and everything it tows.

GVM is the vehicle alone. For a truck towing a trailer, the combined limit is the gross combination mass.

Where do I find a vehicle's GVM?

The manufacturer sets the GVM and prints it on the vehicle's compliance plate, usually in the engine bay or a door opening, and in the owner's manual.

The figure is a limit, not a measurement. The only way to know what a loaded vehicle actually weighs is to weigh it, on a public weighbridge or with scales.

What changes above 4.5 tonnes GVM?

The 4.5 tonne GVM line matters everywhere: above it the Heavy Vehicle National Law applies (outside WA and the NT), heavy vehicle on-road fuel tax credits become claimable, and different licensing and inspection rules kick in.

In practice:

  • The NHVR is the regulator for a vehicle over 4.5 tonnes GVM, and Chain of Responsibility duties apply to everyone who influences its trips.
  • Fuel the vehicle uses on public roads earns a fuel tax credit, 21.3 cents a litre from 3 August 2026. A vehicle at 4.5 tonnes or under earns nothing for on-road travel.
  • Mass management rules set legal limits for each axle group as well as the gross figure.

The line is drawn on the rated GVM, not on what the vehicle weighs on the day. A truck rated at 6 tonnes is a heavy vehicle even when it is empty.

What happens if a vehicle is over its GVM?

An overloaded vehicle takes longer to stop, handles badly and wears its brakes, tyres and suspension faster. It is also unlawful to drive, and an insurer can question a claim for a vehicle that was over its rated mass.

Utes and vans are the common case. A canopy, drawers, a bull bar, a full tank, two people and a load of tools can use up the payload before any cargo goes on.

How does IntelliTrac help with heavy and loaded vehicles?

IntelliTrac keeps each vehicle's specifications in the asset register beside its servicing, inspections and trips. Drivers complete pre-start checks in the driver app, and a reported defect becomes a work order.

For vehicles over 4.5 tonnes, journey history and geofences separate on-road from off-road travel for a fuel tax credit claim. See truck GPS tracking and telematics, or estimate a claim with the fuel tax credit calculator.

General information, not tax or legal advice.

Written by Dean Calapai

Dean Calapai is the Founder and CEO of IntelliTrac. He writes about fringe benefits tax and other vehicle taxes, Chain of Responsibility and heavy vehicle rules, council and business fleets, and customer stories. About IntelliTrac

Sources and further reading

Your questions

What you need to know.

GVM stands for gross vehicle mass. It is the maximum a vehicle is allowed to weigh fully loaded, including the vehicle, fuel, people, accessories and cargo, as set by its manufacturer.

GVM is the limit for the vehicle alone. Gross combination mass (GCM) is the limit for the vehicle plus everything it tows, including the trailer and its load. A ute can be under its GVM and still be over its GCM.

Yes. A vehicle with a GVM over 4.5 tonnes is a heavy vehicle. The Heavy Vehicle National Law applies to it outside Western Australia and the Northern Territory, and the fuel it uses on public roads can earn a fuel tax credit.

Yes. Payload is everything added to the empty vehicle: the driver, passengers, tools, cargo and fitted accessories. Payload is GVM less tare mass.

Put the term into practice.

See how IntelliTrac captures the relevant checks, trips and supporting data during normal work. Bring your scenarios.

Book a DemoExplore Solutions

IntelliTrac provides fleet, telematics and field-operations software in Australia. Call 1300 767 492.