Where is the OBD-II port?
The OBD-II port is a 16-pin socket inside the cabin, usually under the dashboard on the driver's side near the steering column. In some vehicles it sits behind a small cover or beside the fuse panel. The owner's manual shows the exact spot.
The port supplies power as well as data, so a device that plugs into it needs no wiring.
What data comes from the OBD-II port?
The vehicle's computers report through the port. The common readings are:
- Vehicle speed.
- Engine speed (RPM).
- Coolant temperature.
- Diagnostic trouble codes, which are the fault codes behind a check-engine light.
- Odometer and fuel consumption, on vehicles that share them.
What you get depends on the make, model and year. An OBD-II connector does not guarantee that a vehicle shares its fuel, odometer, RPM or diagnostic data, so check the vehicles you run before you rely on a reading.
Why does OBD-II matter for GPS tracking?
A plug-in GPS tracker uses the port for power and for vehicle data. That makes it the simplest way to start tracking:
- No wiring. The tracker plugs in and starts reporting.
- Easy to move. When a vehicle is replaced, the tracker moves to the next one.
- Vehicle data with the location. Speed, odometer and engine readings arrive with each trip, where the vehicle shares them.
A fitted tracker is wired into the vehicle instead. It stays out of sight and adds inputs a plug-in tracker doesn't have, such as driver identification and equipment switches. Telematics explains how both send their data to the software.
Which vehicles in Australia have an OBD-II port?
Most cars, utes and vans on Australian roads have one. On-board diagnostics is part of Australia's emission rules for light vehicles (Australian Design Rule 79), so the port has been standard equipment for years.
Many trucks use a different, round diagnostic connector. A plug-in tracker reaches those through a truck adapter.
How does IntelliTrac use the OBD-II port?
The EP26 Easy plugs straight into the OBD-II port and reports the vehicle's location, trips and movement to the IntelliTrac Platform. If it is unplugged, your team gets a notification, and another when it is reconnected.
With the OBDII+ option, the Easy also reads vehicle speed, odometer and RPM from the port, with high-RPM alerts. It reads coolant temperature, diagnostic trouble codes and fuel consumption on vehicles that share them.
For trucks, IntelliTrac recommends the Easy with a truck adapter, the Elite or the Edge ES810. Compare each GPS tracking device for vehicles to choose.
IntelliTrac GPS tracking starts from $12 a vehicle a month, with devices from $150 and a no-lock-in option.
Written by Matthew Calapai
Matthew Calapai is the Platform Development Lead, Brand and Content Designer at IntelliTrac. He writes about the IntelliTrac Platform, IntelliTrac AI, telematics and tracking hardware, fleet software, electric vehicles and customer stories. About IntelliTrac