Guides and compliance

Heavy vehicles

Heavy vehicle rules: the main duties

Whether the Heavy Vehicle National Law applies to you, the duties that matter day to day, and how mass limits and accreditation schemes fit together.

Dean Calapai, Founder and CEO · Updated 11 November 2026

Read the article

Updated 11 November 2026

If you operate vehicles over 4.5 tonnes anywhere except Western Australia or the Northern Territory, the Heavy Vehicle National Law applies to you. Day to day it comes down to four duties: keep vehicles roadworthy, manage driver fatigue, stay within mass and loading limits, and meet the Chain of Responsibility duty that wraps around all of it.

Does the HVNL apply to you?

The line is 4.5 tonnes gross vehicle mass, the manufacturer's rated maximum, not what the vehicle happens to weigh today. A council with two tippers and a bus is a heavy vehicle operator. WA and the NT run their own rules; fleets crossing those borders live under both.

The amended HVNL commenced on 1 August 2026, and this guide reflects it. The NHVR explainer lists the main changes.

Duty one: roadworthiness

Heavy vehicles must meet the Heavy Vehicle Standards and be maintained to them. In practice that means scheduled maintenance actually happening, daily checks before vehicles move, and defects tracked to repair. Inspection regimes vary by state and vehicle class.

Duty two: fatigue

Fatigue rules apply to vehicles over 12 tonnes and to buses over 4.5 tonnes with more than 12 seats. Work and rest limits, work diaries and record-keeping are covered in the fatigue and work diaries guide.

Since 1 August 2026, a driver of any heavy vehicle over 4.5 tonnes also must not drive while impaired by fatigue or unfit to drive, even inside the permitted hours.

Duty three: mass, dimension and loading

Every vehicle and combination has legal mass limits, per axle group and gross:

  • General Mass Limits (GML) apply by default to everyone. On 1 August 2026 they rose to match the former Concessional Mass Limits (CML), which no longer exist, so those weights need no accreditation.
  • Higher Mass Limits (HML) allow more again on approved routes. They need mass accreditation, which is now Alternative Compliance Accreditation for mass, and on many routes require telematics-based monitoring through schemes such as the Intelligent Access Program.

On dimensions, the maximum length for eligible prime mover and semitrailer combinations, and for rigid trucks towing a pig, dog or tag trailer, rose from 19 metres to 20 metres on 1 August 2026 where the vehicle meets the requirements. B-doubles are not included.

Loads must also be restrained to the performance standards in the Load Restraint Guide. Overloading and poor restraint are Chain of Responsibility offences for everyone in the chain.

Access: where heavy vehicles may travel

Restricted-access vehicles need to stay on approved networks or hold permits. The NHVR publishes gazetted networks, and route planning should treat network restrictions as a first-class input. IntelliTrac's route planning flags NHVR network restrictions for review; a person confirms the route, which is how it should be.

Accreditation in one paragraph

The Heavy Vehicle Accreditation (HVA) scheme is replacing the National Heavy Vehicle Accreditation Scheme (NHVAS). Since 1 August 2026 the NHVR approves no new NHVAS applications or modules, and an existing NHVAS accreditation, with its Mass, Maintenance and Fatigue (BFM and AFM) modules, stays valid until its expiry date. HVA has two levels: General Safety Accreditation, based on an audit of a Safety Management System covering the whole business, and Alternative Compliance Accreditation, which sits on top of it and covers mass and fatigue. An operator holds accreditation in one scheme at a time. Accreditation is voluntary, but it is the entry ticket to concessions such as HML and flexible fatigue hours. The price is documented systems, records and audits, which is exactly what a good digital operations trail makes cheap.

This guide is general information, not legal advice.

The heavy vehicle operator basics

  • Every vehicle over 4.5 tonnes GVM is identified, with its mass limits documented.
  • Maintenance schedules exist per vehicle and completed work is logged.
  • Pre-start checks run before movements and failures escalate.
  • Fatigue-regulated drivers keep work diaries and records are retained.
  • Loading follows documented mass and restraint procedures.
  • Restricted-access vehicles run on approved networks or hold permits.
  • Any NHVAS or HVA accreditation obligations have named owners and audit-ready records.

General information, not tax or legal advice.

Written by Dean Calapai

Dean Calapai is the Founder and CEO of IntelliTrac. He writes about fringe benefits tax and other vehicle taxes, Chain of Responsibility and heavy vehicle rules, council and business fleets, and customer stories. About IntelliTrac

Sources and further reading

Put the guide into daily practice.

IntelliTrac captures the relevant checks, trips and supporting data during normal work. Bring your hardest compliance question.

Book a DemoExplore Solutions

IntelliTrac provides fleet, telematics and field-operations software in Australia. Call 1300 767 492.